I pulled a couple pics as I am changing the routing of the line through the firewall and the mess attached to the oil filter sandwich plate. I'll update with pics when a replacement fitting arrives and is installed ;-)
Light weight Aluminum air scoop for oil cooler and radiator. Previous one wasn't very good.
Oil cooler (Earls 41010 13Wx2Dx3H, 9-row) attached and fitted with 10AN connections.
End rounded over to minimize abrasion on oil lines (it's a tight fit as you'll see later.
Back side of rounded corner.
Trim added to increase softening of corner.
Oil lines from sandwich platge added.
Oil lines from sandwich platge added.
Accusump placed into passenger side seat well.
One J-clamp in place, but will fab a custom bracket to hold globe valve (heavy).
Radiator boxed in to drive flow.
Oil lines going under frame and into air scoop.
Looking up into the scoop (aka the clag view). Cooler safely tucked in behind the grill vents.
Another clag view.
1 comment:
Hi, awesome blog about your roadster racer. Very informative! I'm planning also to race mine in the vintage racing series here in the Philippines. I also have a blog: http://www.projecttm.blogspot.com. Anyway, great posts! Happy motoring!
Post a Comment